Electric Stove Repair & Maintenance Guide

If your electric stove is acting up, you don’t have to panic. Most hiccups are easy to identify and often fixable with a few basic tools. Below you’ll find the most common problems, quick DIY fixes, and clear signs that it’s time to call in a professional from Taunton Appliance Repair Solutions.

Common Issues and Quick Fixes

Element won’t heat. First, check the element for visible cracks or burnt spots. If it looks fine, unplug the stove and use a multimeter to test for continuity. No continuity means the element is dead and needs replacing.

Uneven heating. This usually points to a faulty temperature sensor or a loose connection on the control board. Tighten any loose wires, then run a quick test. If heat is still uneven, the sensor may need swapping out.

Burner clicks but never gets hot. The ignition coil could be faulty, or the burner may be dirty. Clean any residue with a soft brush, then check the coil for damage. A broken coil will need a replacement part.

Control knob feels loose or doesn’t stay in place. Often the knob’s spline or the underlying knob shaft is worn. Remove the knob, inspect the spline, and replace the shaft if it’s stripped. New knobs are inexpensive and easy to install.

Stove won’t turn on at all. Verify the power supply – a tripped breaker or a blown fuse is the usual culprit. Reset the breaker or replace the fuse, and you should be back in business.

When to Call a Professional

Some problems need more than a screwdriver. If you notice any of these signs, reach out to a qualified technician:

  • Persistent error codes on the digital display.
  • Repeated tripping of the circuit breaker.
  • Smell of burning or visible sparks.
  • Water or other liquids have entered the control panel.
  • Warranty is still valid and you don’t want to void it.

Taunton Appliance Repair Solutions has certified electricians who specialize in electric cooktops. They can diagnose complex electronic faults, replace sealed units, and ensure everything complies with safety standards.

Regular maintenance can prevent most of these headaches. Every six months, wipe down the surface, clean the burners, and check the power cord for wear. Keep the area around the stove clear of flammable items, and never use the oven as a storage space.

Energy efficiency matters too. If your stove is more than 10 years old, it might be using more electricity than a newer model. Upgrading can lower your bills and give you better temperature control.

In short, start with a visual inspection, run simple tests, and don’t ignore any unusual smells or sounds. When in doubt, a quick call to Taunton’s local experts can save you time, money, and the risk of a bigger problem down the line.

How Do You Reset an Electric Hob? Quick Steps and Tips

Posted by Orin Trask
0 Comments

How Do You Reset an Electric Hob? Quick Steps and Tips

Ever had your electric hob freeze, blink, or just stop working for no clear reason? Resetting it is easier than you think, and it's often the first thing to try before calling for repairs. This guide covers step-by-step instructions for resetting most electric hobs, possible reasons why resets are needed, and what to do if things don’t go as planned. I’ll also share some handy tips so you can get back to cooking without a fuss. Let's get your kitchen sorted out, fast.

read more