Plug In Electric Oven Problems – What to Do Right Now

If your plug in electric oven suddenly stops heating, flashes lights, or just won’t turn on, you’re probably wondering if you can fix it yourself or need a professional. The good news is many issues are simple enough to tackle in under an hour. The bad news? Some problems involve electricity or parts that are best left to a qualified tech. Below we break down the most common culprits, quick DIY checks, and clear signs it’s time to call the experts.

First‑Check Checklist

Before you pull out any tools, run through this three‑step checklist. It takes less than five minutes and often solves the problem.

1. Power supply – Make sure the oven is firmly plugged into a working outlet. Test the outlet with a lamp or a multimeter. If there’s no power, try another socket or reset the circuit breaker.

2. Fuse or circuit breaker – Many ovens are on a dedicated 15‑amp breaker. If the breaker has tripped, flip it back on. If it trips again, stop there – it could be a short circuit.

3. Oven door latch – Most electric ovens won’t run if the door isn’t fully closed. Open and close the door a few times to ensure the latch clicks into place.

Common Issues You Can Fix

Heating element failure – If the oven heats but the top or bottom element is cold, the element may be burnt out. Unplug the oven, locate the element (usually behind the oven wall), and look for visible cracks or black spots. Replacing the element is a straightforward swap – just unscrew the old part and screw in the new one.

Control board glitches – Some ovens have a reset button hidden behind the control panel. Press it for a few seconds, then try turning the oven on again. If the display is flickering or unresponsive, the control board might need a professional repair.

Thermostat or temperature sensor – If your oven heats but the temperature is wildly off, the sensor could be the problem. You can test it with an ohmmeter; a healthy sensor reads around 1,100 Ω at room temperature. Replace it if the reading is far off.

Loose wiring – Check the plug and the cord for any signs of wear. A loose or frayed cord can cause intermittent power loss. If the cord looks damaged, replace it or have an electrician do it.

These fixes cover about 70 % of everyday oven issues. If you’ve tried the checklist and the fixes above but the oven still won’t work, it’s time to get help.

When to Call a Professional

If you notice any of the following, stop DIY attempts and call a qualified appliance repair service:

• Repeated breaker trips after the oven is plugged in.
• Burning smells, smoke, or visible sparks.
• Complex electronic errors on the display (e.g., “E1” or “F2” codes).
• Broken glass doors or cracked interior panels.
• You’re not comfortable working with electricity.

Professional technicians have the tools to test high‑voltage components safely and can replace control boards, high‑end heating elements, or fix wiring issues that require code‑compliant work.

At Taunton Appliance Repair Solutions we specialize in plug in electric oven repairs. Our techs can diagnose the problem quickly, source genuine parts, and get your oven back to cooking in no time. Give us a call, and we’ll sort it out for you.

Remember, safety comes first. If you ever feel unsure, it’s better to wait for a pro than risk injury or more damage. With the right checks and a bit of know‑how, many oven hiccups can be fixed at home, saving you time and money.