Microwave Repair: Quick Fixes & When to Call a Pro

Got a microwave that’s acting up? You’re not alone. Most of us rely on that little box for quick meals, so when it stops heating or the turntable won’t spin, it feels like a mini disaster. The good news? Many problems are easy to spot and often cheap to fix. And if you’re stuck, our Taunton team is just a phone call away.

Common Microwave Problems

Microwave won’t heat. This is the most frustrating issue. The likely culprits are a blown fuse, a faulty magnetron, or a door latch that isn’t sealing properly. A quick visual check of the fuse (usually a small glass tube) can tell you if it’s blown – if the filament inside looks broken, replace it.

Turntable won’t spin. Usually a bad motor or a worn-out roller guide. First, make sure the turntable is sitting flat on its glass plate. If it’s wobbly, the guide might need a replacement. Swapping the motor is a bit more involved, so most people call a pro for this one.

Buttons or keypad unresponsive. Moisture and crumbs love to hide under the keys. Unplug the microwave, gently remove the outer panel (usually held by a few screws), and wipe the keypad with a dry cloth. If the buttons still don’t work, the control board may need a replacement.

Rattling or buzzing noises. A loose fan blade or a failing high‑voltage capacitor can cause these sounds. Turn off the unit, open the rear panel, and look for any loose screws or damaged parts. Tightening a screw can sometimes stop the noise.

DIY Checks Before You Call

Before you book a technician, try these safe, quick steps:

• Power reset. Unplug the microwave for two minutes, then plug it back in. This can clear minor electronic glitches.
• Clean the interior. Food splatters can block the ventilation and cause overheating. Wipe down walls, the door seal, and the vent with a damp cloth.
• Check the door latch. Open and close the door a few times. If it feels loose, the latch may need adjustment or replacement.
• Inspect the fuse. As mentioned, a blown fuse stops the microwave from heating. Replacing a fuse is cheap and simple.

If any of these steps don’t bring your microwave back to life, it’s time to call in the experts. Trying to replace a magnetron or control board yourself can be dangerous – those parts hold high voltage even when unplugged.

Our Taunton Appliance Repair Solutions team handles all microwave repairs with a 2‑hour response window for urgent jobs. We carry common parts on‑site, so most fixes are done on the spot, saving you time and money. Plus, we run a transparent pricing policy – you’ll know the cost before we start.

Bottom line: a non‑heating microwave often points to a fuse or door issue you can check yourself. If the turntable’s stuck or the keypad is dead, it’s smarter to let a qualified tech take over. Either way, you won’t have to live without quick meals for long.